MGL Avionics Type-K EGT Thermocouple Clamp - Type small. 1.5 Dia. |
This probe has a length of 5/8.
These work well but while the probe itself may be stainless, the strain relief spring covering the wire is not -- all of them are covered in surface rust after two months exposure to Hawaii climate. Disappointing.
I do not know yet as I have not installed yet.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per MGL, the small clamp may not fit. They recommend part number 11-05567 as long as you have a threaded receptacle on the exhaust.
The MGL EGT clamp is 1.5" when it is tightened. We tested one and were able to tighten it to 1.375" but we can not guarantee that it will fit.
The MGL type K EGT thermocouple (11-07842) has a 4' lead.
This probe is 36 inches in length.