PN | Cable | OD | Groove Dia |
Hub Dia |
Bore Dia |
Width | Load Limit |
Price | Buy |
---|---|---|---|---|---|---|---|---|---|
MS24566-1B | 1/16,5/64,3/32 | 1.250 | .972 | .625 | .1900 | .297 | 300 | $28.50 | |
MS24566-2B | 1/16,5/64,3/32 | 2.500 | 2.222 | .777 | .1900 | .297 | 500 | $37.50 | |
MS24566-3B | 1/8,5/32,3/16 | 2.000 | 1.510 | .901 | .2500 | .484 | 600 | $26.50 | |
MS24566-4B | 1/8,5/32,3/16 | 3.500 | 3.010 | .901 | .2500 | .484 | 1200 | $35.50 | |
MS20219- 1 | 1/16,3/32 | 1.312 | 1.000 | .423 | .2500 | .438 | 480 | $35.50 | |
MS20219- 2 | 1/16,3/32 | 1.750 | 1.438 | .423 | .2500 | .438 | 480 | $30.85 | |
MS20219- 3 | 1/16,3/32 | 1.750 | 1.438 | .769 | .6250 | .438 | 480 | $47.75 | |
MS20219- 4 | 1/16,3/32 | 2.625 | 2.312 | .423 | .2500 | .438 | 920 | $29.85 | |
MS20220- 1 | 1/8,5/32,3/16 | 1.755 | 1.255 | .475 | .3125 | .625 | 500 | $33.50 | |
MS20220- 2 | 1/8,5/32,3/16 | 3.005 | 2.505 | .475 | .3125 | .625 | 1680 | $39.50 | |
MS20220- 3 | 1/8,5/32,3/16 | 4.255 | 3.755 | .475 | .3125 | .625 | 2500 | $44.50 | |
MS20220- 4 | 1/8,5/32,3/16 | 5.505 | 5.005 | .475 | .3125 | .625 | 2500 | $61.75 | |
A-223 | 1/16,3/32,1/8 | 1.000 | .688 | -- | .2500 | .281 | -- | $12.50 | |
A-224 | 1/16,3/32,1/8 | 1.750 | 1.375 | -- | .2500 | .250 | -- | $10.85 | |
NAS383-1 | 1/16,3/32,1/8 | 1.250 | .875 | -- | .2500 | .265 | -- | $12.50 | |
A-123 | 1/16,3/32 | 2.000 | 1.500 | -- | .2500 | .265 | -- | $14.50 | |
NAS383-2 | 3/32 | 2.500 | 2.000 | -- | 0.255 | .270 | -- | $15.50 | |
NAS383-3 | 1/8,5/32 | 2.000 | 1.375 | -- | .3750 | .438 | -- | $10.95 | |
A-120 | 5/32,3/16 | 3.000 | 2.375 | -- | .3750 | .438 | -- | $17.50 | |
BB-120 | 3/16 | 3.000 | 2.375 | -- | .2500 | .484 | $47.55 | ||
BB-128 | 3/16 | 2.500 | 1.875 | -- | .2500 | .440 | -- | $40.50 |
N210A & AN210B (MS24566) Anti-Friction Bearing Control Pulley with phenolic body and ball bearing with seal. The AN210A pulleys are dimensionally the same as the B pulleys but have metal-shielded bearings rather than removable composition-seal type bearings. The low allowable design load of the -3A and -3B pulleys-is based on cable fatigue. AN210-1A, AN210-3A, AN210-1B and AN210-3B shall not be installed on frequently used aircraft controls to bend the cable more than 15 degrees from a straight line.
MS20220 (AN220) Flight Control Pulley with phenolic body and ball bearing with seal. Also available with aluminum body (MS20220A). The low allowable load limit of the -1 pulley is based on cable fatigue. When used on frequently used aircraft controls the cable wrap angle should not be more than 15 degrees from a straight line. MS20219 (AN219) Aircraft Secondary Control Pulley with phenolic body and ball bearing with seal. MS20219A (AN219A) Pulley with anodized aluminum body and ball bearing with seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley shall not be installed in flight control systems. NAS383 Series Pulley with phenolic body and graphite impregnated bronze sleeve. This is a low cost pulley widely used in aircraft, winches, cranes and remote mechanical actuation devices. A-223 and A-224 Pulleys with plain phenolic bore are used as guide and secondary control pulleys in production aircraft. BB-128-1 and BB-120-1 Pulleys have high pressure phenolic bodies and ball bearings with Teflon™ seals. Used in Christavia and many other aircraft. |
Received as ordered
MS24566-1B PHENOLIC PULLEY
These pulleys replaced pulleys with an expired AN # and they fit perfectly.
MS24566-1B PHENOLIC PULLEY
Perfect 👌
MS24566-4B PHENOLIC PULLEY
Good quality.
MS24566-1B PHENOLIC PULLEY
These are exactly what my drawings called for. Nice and smooth.
MS24566-3B PHENOLIC PULLEY
This pulley replaced one that had to have been 50 years old. It was a simple switch and went very smoothly. Great product. Great service. Fast delivery. Thanks
PULLEYS MS20220-4
Fairly large pulley. No bearing surface other than the pulley itself. Sized for 1/4 bolt. I would say adequate for light applications and flexable 7x19 3/32 cable.
PULLEYS A-224
Pleasure to deal with. Received order on time
PHENOLIC PULLEY MS20219-1
Excellent product, ideal for engines with manual start.
It looks OK.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.