P & B Part No. | AMP Rating |
Beech | Cessna | Piper | Part No. | Price | Buy |
---|---|---|---|---|---|---|---|
W31X2M1G1 | 1 | - | - | - | 11-00805 | $60.75 | |
W31X2M1G2 | 2 | - | - | - | 11-03893 | $57.75 | |
W31X2M1G3 | 3 | - | - | - | 11-04268 | $46.50 | |
W31X2M1G5 | 5 | - | - | - | 11-03936 | $43.85 | |
W31X2M1G7.5 | 7.5 | - | - | - | 11-03894 | $41.90 | |
W31X2M1G10 | 10 | - | - | - | 11-03931 | $35.50 | |
W31X2M1G15 | 15 | - | - | - | 11-03932 | $33.70 | |
W31X2M1G20 | 20 | - | - | - | 11-03933 | $40.50 | |
W31X2M1G25 | 25 | - | - | - | 11-03934 | $43.50 | |
W31X2M1G30 | 30 | - | - | - | 11-04123 | $35.50 | |
W31X2M1G35 | 35 | - | - | - | 11-04124 | $42.55 | |
W31X2M1G40 | 40 | - | - | - | 11-03935 | $42.65 | |
W31X2M1G50 | 50 | - | - | - | 11-04125 | $43.65 |
These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).
Toggle Thermal Circuit Breaker • 0.5 amp to 50 amp ratings may be used as on/off switch. • Cannot be reset against overload. • Screw termination. • Trip-free operation. |
Always quality from Spruce. Always a little pricey
TE P&B CIRCUIT BREAKER W31-X2M1G-10
fits where the old non pullable breaker was, now I can turn off some always on items for ground testing
TE P&B CIRCUIT BREAKER W31-X2M1G-10
it was just i wanted, But i to order it by phone, your online service , didnt work.
TE P&B CIRCUIT BREAKER W31-X2M1G-50
TE P&B CIRCUIT BREAKER W31-X2M1G-40
TE P&B CIRCUIT BREAKER W31-X2M1G-5
Works Expensive shipping
TE P&B CIRCUIT BREAKER W31-X2M1G-10
ok
TE P&B CIRCUIT BREAKER W31-X2M1G-5
Replaces the Cessna Toggle/Breaker perfectly Cessna # W31-X1000-5
TE P&B CIRCUIT BREAKER W31-X2M1G-5
I ordered it as a replacement for an identical one that failed with less than 15 hours on it. Well see how it goes, its survived 2 hours of operation so far.
TE P&B CIRCUIT BREAKER W31-X2M1G-10
Worked great for my 53 Bonanza alternator upgrade. Was a perfect fit in place of my existing Gen switch.
TE P&B CIRCUIT BREAKER W31-X2M1G-50
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The arm is the same length as a toggle switch that would be used with at switch guard, so it "should" work fine. If the switch/breaker is positioned to be on when the guard is down, it would stay on until the guard is lifted and manually turned off. Remember each application is different and we cannot guarantee that it will work in all application or situations.
These toggle switches are commercial and have no FAA approval by themselves. They are commonly approved by the airframe approval if they were OEM on certificated aircraft. Please confirm in your parts manual or with you A&P to determine whether these can be used in your airplane.
These toggle switches are commercial and have no FAA approval by themselves. They are commonly approved by the airframe approval if they were OEM on certificated aircraft. Please confirm in your parts manual AND with you A&P to determine whether these can be used in your airplane.
The line side is receiving power and the load side goes to the unit.