I bought EZ Turn for use on vintage motorcycle petcocks. It is as advertised. Very tacky to use and apply. It made my petcocks operate smoothly and seals threads on connections as well.

Robert J Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

Worked very well for me. Applied it to underside of wing, around an access plate to the wet wing fuel tank on my homebuilt Bushby Mustang2.

Owen R Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

Excellent product.

George R Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

Good stuff

James D Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

A+

Dennis H Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

awesome product. Amazing really.

Bart C Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

good product

John D Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

We use this for lubricating the fuel selectors on our Comanche 250s. Works great.

Br F Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

My application is on the cork fuel tap plungers of a vintage British motorcycle. It makes a usually difficult task extremely easy. Highly recommended.

Dave B Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

I have spent years trying to find petcocks that dont leak for my 1936 Harley-Davidson. I have replaced them several times, tried valve lapping compound, and even some gas proof pipe dope with only some temporary success. Finally a friend told me about EZ Turn. Its only been a couple weeks, but so far, so good. No leaks yet!

Bernard E Verified Purchase

EZ TURN (FUELLUBE) 5 OZ TUBE

I used EZ Turn Lubricant for a rotary hand pump for a portable 30 gallon premium gasoline fuel tank. It created the seal I had hoped for and lubricated the internal moving parts perfectly without having to re- lubricate multiple times due to dissolving in fuel like other lubricants I have tried. Works like a dream. Very glad I got EZ Turn Lubricant and highly suggest and recomend it.

So far so good, product has held up to everything I have applied it too. Great product !

Great stuff, helps keep those packings from drying out in the fuel system.

Works great on O rings that will be in fuel soaked areas!

I purchased the EZ Turn on the recommendation of a friend, and WOW, I have not been disappointed! I used this on a carburetor rebuild where leaking was a concern. Not only did it make assembly a snap, it will make rebuilding at a later date easier as well. Because of the heat we experience here in Arizona, gaskets sticking to the body of carburetors can be a real concern. EZ Turn has made my life so much easier.

Am using it to lubricate aircraft primer plunger. Works very well. We run the Rotax engine on autogas with 10% ethanol, and other lubricants wouldnt work well. Hope that the different formulation of this lubricant will work better.

Love the product. Im not using it for aircraft. EZ Turn has become a must-have in the toolbox of folks who drive Model T Fords! They tend to leak like sieves! Service was great with immediate turnaround of the order.

I am in the process of rebuilding and reinstalling the carburetor on my 1985 Oldsmobile Toronado. I did not want to use any tape to seal the gasoline and primary ported vacuum lines. Reading from sources online sent me to a product called Jet Lube, from Aircraft Spruce. The new product name is EZ Turn. I ordered the item online and went to pick it via will call on Friday. What a big building, and right across from Fender Guitars, too! Great location. I had heard of Aircraft Spruce because my wife applied for a position there last Spring. She could not answer their return call request in time and so the job went to someone else. I had also read up on the family history of the company and was extremely impressed by what I found! The EZ Turn was put on the requisite lines the day I got it. The car will be finished as soon as I get one more carburetor brass inlet line from a similar Oldsmobile 307 V8 in a local wrecking yard.

Excellent product, handy in the tube size.

Used on the A/Cs primer plunger, worked excellent.

I bought this to replace the one I have almost used up from a purchase 15 years ago.

I havent had a chance to use it myself, however I have heard nothing but great results from others that use it.

Without question the best sealant out there.

I bought this when replacing a Curtis fuel drain valve. The previous valve had Teflon tape on the threads and began leaking. I tried tightening it and eventually got it to seal but I tightned it so much the valve wouldnt open. I decided to replace the valve and use this Ez Turn Lubricant since it was rated for av-gas. It worked great! Got a nice seal and it looks much better than having Teflon tape on the threads. It makes me want to change the rest of the drain valves and use Ez Turn Lube.

a must have for any toolbox

Great product, packaging and shipping

Great stuff.

Works great. Use instead of Teflon tape to seal threads in fuel and oil fittings.

I bought this lube to fix an oil gasket leak in my Porsche 912 engine & it worked perfect!

I have a 1912 Model T Ford that has a shutoff valve for the gas that leaked and was very hard to move in the vertical and horizontal positions. Took it apart, cleaned it, put the EZ Turn on the tapered shaft, and no more leak and very easy to turn. Same thing with the radiator. Petcock leaked, took it off the radiator, took it apart, put EZ Turn on the tapered shaft and no more leak. Great product. Recommend it highly.

Two Rochester carbs with leaking fuel inlets were giving me fits. I ordered EZ Turn on advice from mechanics that seem to know their stuff. Now their stuff is my stuff. I giving a tube to my brother as a thanks for nhis mechanical support over the years. EZ Turn just feels like it is the answer. Applied as directed, it eased the parts together and delivered as promised. No drips no monster tightening. Im sold. Put a tube in your toolbox.

I use this product on my fuel valves of a 1921 model T Ford. The valves rotate so easy and no fuel seepage past the tapered handles. What a great product. I would highly recommend this product.

The product is great and exactly what I was looking for!

Works! Good stuff!

I use this product on all of the fuel petcocks on my antique motorcycles including my race bikes. It makes the 70 year old brass petcocks operate like brand new. I also use it on new petcocks. This stuff works great with pump gas (ethanol), race fuel and everything in between.

on time-exactly what i ordered.

Worked Great. A little goes a long way.

Seemed to work just fine in getting a Cessna 150 fuel shutoff valve to work without stiffness. How long it will last in service remains to be seen....

Man, does this stuff stick to your parts and how! Used it to rebuild a fuel selector valve and it still switches like a champ. One tube should last a lifetime.

This seals fuel pipe threads and lubricates seals very well. It has the thickness of peanut butter.

Havent used the product yet which is why I only gave it 4 stars, but delivery was right on schedule and it appears to have the consistency that I am looking for. I am anticipating very positive results on my 1929 Model A Ford Fuel lines and shutoff valve.

Not what I needed. Purchased due to testimonial on other source. Will use for other lubes