Made of 303SE Stainless Steel. Used in same manner as AN100 cable thimble. |
Finish is a little rough, sanding them a touch helps. Overall diameter = 0.435 width = 0.150. Frankly I thought the cable channel was a little tight for 3/32 cable so went with the next size up for 1/8 cable.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
It has a 3/16" hole through the center.
AN111-4 diameter is approximately 1/2" and the width is approx 3/16".
1/16" & 3/32" cable can be used with AN111-3.